From cf7c06297d04bade9cd04c056f9ed510e64dd7bd Mon Sep 17 00:00:00 2001
From: Uros Majstorovic <majstor@majstor.org>
Date: Wed, 5 Aug 2020 03:39:22 +0200
Subject: code -> fw

---
 code/fe310/bsp/openocd.cfg | 34 ----------------------------------
 1 file changed, 34 deletions(-)
 delete mode 100644 code/fe310/bsp/openocd.cfg

(limited to 'code/fe310/bsp/openocd.cfg')

diff --git a/code/fe310/bsp/openocd.cfg b/code/fe310/bsp/openocd.cfg
deleted file mode 100644
index 1205cbd..0000000
--- a/code/fe310/bsp/openocd.cfg
+++ /dev/null
@@ -1,34 +0,0 @@
-#write_config_file
-# JTAG adapter setup
-adapter_khz     10000
-
-interface ftdi
-ftdi_device_desc "FT2232H-56Q MiniModule"
-ftdi_vid_pid 0x0403 0x6010
-
-ftdi_layout_init 0x0008 0x001b
-ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020
-
-#Reset Stretcher logic on FE310 is ~1 second long
-#This doesn't apply if you use
-# ftdi_set_signal, but still good to document
-#adapter_nsrst_delay 1500
-
-set _CHIPNAME riscv
-jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000913
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
-$_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
-
-flash bank spi0 fespi 0x20000000 0 0 0 $_TARGETNAME.0 0x10014000
-init
-if {[ info exists pulse_srst]} {
-	ftdi_set_signal nSRST 0
-	ftdi_set_signal nSRST z
-sleep 1500
-}
-halt
-
-# flash protect 0 64 last off
-echo "Ready for Remote Connections"
-- 
cgit v1.2.3