From ce92f3508c05bff4f06a27f01e8f737b706ff48e Mon Sep 17 00:00:00 2001 From: Uros Majstorovic Date: Sat, 7 Aug 2021 00:46:38 +0200 Subject: initial commit --- .../rvphone/cl-imx8/include/configs/cl-imx8.h | 281 +++++++++++++++++++++ .../cl-imx8/include/configs/cl-imx8_android.h | 53 ++++ 2 files changed, 334 insertions(+) create mode 100644 recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8.h create mode 100644 recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8_android.h (limited to 'recipes-bsp/u-boot/rvphone/cl-imx8/include/configs') diff --git a/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8.h b/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8.h new file mode 100644 index 0000000..049d09a --- /dev/null +++ b/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8.h @@ -0,0 +1,281 @@ +/* + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CL_IMX8_H +#define __CL_IMX8_H + +#include +#include +#include "imx_env.h" + +#ifdef CONFIG_SECURE_BOOT +#define CONFIG_CSF_SIZE 0x2000 /* 8K region */ +#endif + +#define CONFIG_SPL_TEXT_BASE 0x7E1000 +#define CONFIG_SPL_MAX_SIZE (148 * 1024) +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 + +#ifdef CONFIG_SPL_BUILD +/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ +#define CONFIG_SPL_WATCHDOG_SUPPORT +#define CONFIG_SPL_DRIVERS_MISC_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" +#define CONFIG_SPL_STACK 0x187FF0 +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_BSS_START_ADDR 0x00180000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */ +#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF + +#define CONFIG_MALLOC_F_ADDR 0x182000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ + +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE /* For RAW image gives a error info not panic */ + +#undef CONFIG_DM_MMC +#undef CONFIG_DM_PMIC +#undef CONFIG_DM_PMIC_PFUZE100 + +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ +#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE100 +#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 +#endif + +#define CONFIG_REMAKE_ELF + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_POSTCLK_INIT +#define CONFIG_BOARD_LATE_INIT + +/* Flat Device Tree Definitions */ +#define CONFIG_OF_BOARD_SETUP + +#undef CONFIG_CMD_IMLS + +#undef CONFIG_CMD_CRC32 +#undef CONFIG_BOOTM_NETBSD + +/* ENET Config */ +/* ENET1 */ +#if defined(CONFIG_CMD_NET) +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_MII +#define CONFIG_ETHPRIME "FEC" + +#define CONFIG_FEC_MXC +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_FEC_MXC_PHYADDR 0 +#define FEC_QUIRK_ENET_MAC + +#define CONFIG_PHY_GIGE +#define IMX_FEC_BASE 0x30BE0000 + +#define CONFIG_PHYLIB +#define CONFIG_PHY_ATHEROS +#endif + +#define CONFIG_MFG_ENV_SETTINGS \ + "mfgtool_args=setenv bootargs console=${console},${baudrate} " \ + "rdinit=/linuxrc " \ + "g_mass_storage.stall=0 g_mass_storage.removable=1 " \ + "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\ + "g_mass_storage.iSerialNumber=\"\" "\ + "clk_ignore_unused "\ + "\0" \ + "initrd_addr=0x43800000\0" \ + "initrd_high=0xffffffff\0" \ + "bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \ +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_MFG_ENV_SETTINGS \ + "script=boot.scr\0" \ + "image=Image\0" \ + "console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200\0" \ + "fdt_addr=0x43000000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "boot_fdt=try\0" \ + "fdt_file="CONFIG_DEFAULT_DTB"\0" \ + "initrd_addr=0x43800000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcautodetect=yes\0" \ + "mmcargs=setenv bootargs console=${console} root=/dev/mmcblk${mmcdev}p2 rootwait rw\0 " \ + "loadbootscript=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "booti ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "else " \ + "echo wait for boot; " \ + "fi;\0" \ + "autoload=off\0" \ + "netargs=setenv bootargs console=${console} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${loadaddr} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "booti ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "else " \ + "booti; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else booti ${loadaddr} - ${fdt_addr}; " \ + "fi; " \ + "fi; " \ + "else booti ${loadaddr} - ${fdt_addr}; fi" + +/* Link Definitions */ +#define CONFIG_LOADADDR 0x40480000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x80000 +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_ENV_OVERWRITE +#define CONFIG_ENV_OFFSET (64 * SZ_64K) +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1/eMMC */ +#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (2*1024) + (16*1024)) * 1024) + +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define PHYS_SDRAM 0x40000000 + +#ifdef CONFIG_RAM_1G +#define PHYS_SDRAM_SIZE 0x40000000 /* 1GB DDR */ +#else +#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ +#endif + +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1)) + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR + +/* Monitor Command Prompt */ +#undef CONFIG_SYS_PROMPT +#define CONFIG_SYS_PROMPT "u-boot=> " +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_CBSIZE 2048 +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +#define CONFIG_IMX_BOOTAUX + +#define CONFIG_CMD_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC + +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 + +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 + +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_OCOTP +#define CONFIG_CMD_FUSE + +/* I2C Configs */ +#define CONFIG_SYS_I2C_SPEED 100000 + +/* USB configs */ +#ifndef CONFIG_SPL_BUILD + +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE + +#define CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_USB_FUNCTION_MASS_STORAGE + +#define CONFIG_CMD_READ + +#endif + +#define CONFIG_OF_SYSTEM_SETUP + +/* Framebuffer */ +#ifdef CONFIG_VIDEO +#define CONFIG_VIDEO_IMXDCSS +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_IMX_VIDEO_SKIP +#endif + +#if defined(CONFIG_ANDROID_SUPPORT) +#include "cl-imx8_android.h" +#endif + +#endif diff --git a/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8_android.h b/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8_android.h new file mode 100644 index 0000000..aa8e010 --- /dev/null +++ b/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8_android.h @@ -0,0 +1,53 @@ +/* + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CL_IMX8_ANDROID_H +#define __CL_IMX8_ANDROID_H + +#define CONFIG_CMD_READ + +#define CONFIG_ANDROID_AB_SUPPORT +#define CONFIG_AVB_SUPPORT +#define CONFIG_SUPPORT_EMMC_RPMB +#define CONFIG_SYSTEM_RAMDISK_SUPPORT +#define CONFIG_AVB_FUSE_BANK_SIZEW 0 +#define CONFIG_AVB_FUSE_BANK_START 0 +#define CONFIG_AVB_FUSE_BANK_END 0 +#define CONFIG_FASTBOOT_LOCK +#define FSL_FASTBOOT_FB_DEV "mmc" + +#ifdef CONFIG_SYS_MALLOC_LEN +#undef CONFIG_SYS_MALLOC_LEN +#define CONFIG_SYS_MALLOC_LEN (96 * SZ_1M) +#endif + +#define CONFIG_ANDROID_RECOVERY + +#define CONFIG_CMD_BOOTA +#define CONFIG_SUPPORT_RAW_INITRD + +#undef CONFIG_EXTRA_ENV_SETTINGS +#undef CONFIG_BOOTCOMMAND + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "splashpos=m,m\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + +/* Enable mcu firmware flash */ +#ifdef CONFIG_FLASH_MCUFIRMWARE_SUPPORT +#define ANDROID_MCU_FRIMWARE_DEV_TYPE DEV_MMC +#define ANDROID_MCU_FIRMWARE_START 0x500000 +#define ANDROID_MCU_FIRMWARE_SIZE 0x40000 +#define ANDROID_MCU_FIRMWARE_HEADER_STACK 0x20020000 +#endif + +#ifdef CONFIG_FSL_CAAM_KB +#undef CONFIG_FSL_CAAM_KB +#endif +#define AVB_AB_I_UNDERSTAND_LIBAVB_AB_IS_DEPRECATED + +#endif /* __CL_IMX8_ANDROID_H */ -- cgit v1.2.3 From 0102ab2bf16e1f8e8d2b46295d7acdc7f98eeaa7 Mon Sep 17 00:00:00 2001 From: Uros Majstorovic Date: Sat, 7 Aug 2021 01:37:23 +0200 Subject: fixed u-boot --- recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'recipes-bsp/u-boot/rvphone/cl-imx8/include/configs') diff --git a/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8.h b/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8.h index 049d09a..a2cb9a6 100644 --- a/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8.h +++ b/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8.h @@ -119,11 +119,11 @@ "fdt_addr=0x43000000\0" \ "fdt_high=0xffffffffffffffff\0" \ "boot_fdt=try\0" \ - "fdt_file="CONFIG_DEFAULT_DTB"\0" \ + "fdt_file="CONFIG_DEFAULT_FDT_FILE"\0" \ "initrd_addr=0x43800000\0" \ "initrd_high=0xffffffffffffffff\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart="__stringify(CONFIG_SYS_MMC_IMG_LOAD_PART)"\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} root=/dev/mmcblk${mmcdev}p2 rootwait rw\0 " \ "loadbootscript=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ -- cgit v1.2.3 From 47baf57c43dfadf0b01325c5ccd1c3f421827381 Mon Sep 17 00:00:00 2001 From: Uros Majstorovic Date: Sat, 7 Aug 2021 02:57:10 +0200 Subject: no usb for u-boot --- .../u-boot/rvphone/cl-imx8/include/configs/cl-imx8.h | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'recipes-bsp/u-boot/rvphone/cl-imx8/include/configs') diff --git a/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8.h b/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8.h index a2cb9a6..81d0e20 100644 --- a/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8.h +++ b/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8.h @@ -246,20 +246,6 @@ /* I2C Configs */ #define CONFIG_SYS_I2C_SPEED 100000 -/* USB configs */ -#ifndef CONFIG_SPL_BUILD - -#define CONFIG_CMD_USB -#define CONFIG_USB_STORAGE - -#define CONFIG_CMD_USB_MASS_STORAGE -#define CONFIG_USB_GADGET_MASS_STORAGE -#define CONFIG_USB_FUNCTION_MASS_STORAGE - -#define CONFIG_CMD_READ - -#endif - #define CONFIG_OF_SYSTEM_SETUP /* Framebuffer */ -- cgit v1.2.3