From 76ec318118106cb25d762de83857f6579c13e273 Mon Sep 17 00:00:00 2001 From: Uros Majstorovic Date: Fri, 27 Aug 2021 03:06:13 +0200 Subject: yocto rename --- .../rvphone/cl-imx8/include/configs/cl-imx8.h | 267 --------------------- .../cl-imx8/include/configs/cl-imx8_android.h | 53 ---- 2 files changed, 320 deletions(-) delete mode 100644 recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8.h delete mode 100644 recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8_android.h (limited to 'recipes-bsp/u-boot/rvphone/cl-imx8/include') diff --git a/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8.h b/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8.h deleted file mode 100644 index 81d0e20..0000000 --- a/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8.h +++ /dev/null @@ -1,267 +0,0 @@ -/* - * Copyright 2017 NXP - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CL_IMX8_H -#define __CL_IMX8_H - -#include -#include -#include "imx_env.h" - -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CSF_SIZE 0x2000 /* 8K region */ -#endif - -#define CONFIG_SPL_TEXT_BASE 0x7E1000 -#define CONFIG_SPL_MAX_SIZE (148 * 1024) -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 - -#ifdef CONFIG_SPL_BUILD -/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" -#define CONFIG_SPL_STACK 0x187FF0 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_BSS_START_ADDR 0x00180000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */ -#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 -#define CONFIG_SYS_ICACHE_OFF -#define CONFIG_SYS_DCACHE_OFF - -#define CONFIG_MALLOC_F_ADDR 0x182000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ - -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE /* For RAW image gives a error info not panic */ - -#undef CONFIG_DM_MMC -#undef CONFIG_DM_PMIC -#undef CONFIG_DM_PMIC_PFUZE100 - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ - -#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_PFUZE100 -#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 -#endif - -#define CONFIG_REMAKE_ELF - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_POSTCLK_INIT -#define CONFIG_BOARD_LATE_INIT - -/* Flat Device Tree Definitions */ -#define CONFIG_OF_BOARD_SETUP - -#undef CONFIG_CMD_IMLS - -#undef CONFIG_CMD_CRC32 -#undef CONFIG_BOOTM_NETBSD - -/* ENET Config */ -/* ENET1 */ -#if defined(CONFIG_CMD_NET) -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII -#define CONFIG_MII -#define CONFIG_ETHPRIME "FEC" - -#define CONFIG_FEC_MXC -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_FEC_MXC_PHYADDR 0 -#define FEC_QUIRK_ENET_MAC - -#define CONFIG_PHY_GIGE -#define IMX_FEC_BASE 0x30BE0000 - -#define CONFIG_PHYLIB -#define CONFIG_PHY_ATHEROS -#endif - -#define CONFIG_MFG_ENV_SETTINGS \ - "mfgtool_args=setenv bootargs console=${console},${baudrate} " \ - "rdinit=/linuxrc " \ - "g_mass_storage.stall=0 g_mass_storage.removable=1 " \ - "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\ - "g_mass_storage.iSerialNumber=\"\" "\ - "clk_ignore_unused "\ - "\0" \ - "initrd_addr=0x43800000\0" \ - "initrd_high=0xffffffff\0" \ - "bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \ -/* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_MFG_ENV_SETTINGS \ - "script=boot.scr\0" \ - "image=Image\0" \ - "console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200\0" \ - "fdt_addr=0x43000000\0" \ - "fdt_high=0xffffffffffffffff\0" \ - "boot_fdt=try\0" \ - "fdt_file="CONFIG_DEFAULT_FDT_FILE"\0" \ - "initrd_addr=0x43800000\0" \ - "initrd_high=0xffffffffffffffff\0" \ - "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart="__stringify(CONFIG_SYS_MMC_IMG_LOAD_PART)"\0" \ - "mmcautodetect=yes\0" \ - "mmcargs=setenv bootargs console=${console} root=/dev/mmcblk${mmcdev}p2 rootwait rw\0 " \ - "loadbootscript=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ - "booti ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "else " \ - "echo wait for boot; " \ - "fi;\0" \ - "autoload=off\0" \ - "netargs=setenv bootargs console=${console} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "${get_cmd} ${loadaddr} ${image}; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ - "booti ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "else " \ - "booti; " \ - "fi;\0" - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else booti ${loadaddr} - ${fdt_addr}; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - -/* Link Definitions */ -#define CONFIG_LOADADDR 0x40480000 - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x80000 -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -#define CONFIG_ENV_OVERWRITE -#define CONFIG_ENV_OFFSET (64 * SZ_64K) -#define CONFIG_ENV_SIZE 0x1000 -#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1/eMMC */ -#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (2*1024) + (16*1024)) * 1024) - -#define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define PHYS_SDRAM 0x40000000 - -#ifdef CONFIG_RAM_1G -#define PHYS_SDRAM_SIZE 0x40000000 /* 1GB DDR */ -#else -#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ -#endif - -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1)) - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR - -/* Monitor Command Prompt */ -#undef CONFIG_SYS_PROMPT -#define CONFIG_SYS_PROMPT "u-boot=> " -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - -#define CONFIG_IMX_BOOTAUX - -#define CONFIG_CMD_MMC -#define CONFIG_FSL_ESDHC -#define CONFIG_FSL_USDHC - -#define CONFIG_SYS_FSL_USDHC_NUM 2 -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 - -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - -#define CONFIG_MXC_GPIO - -#define CONFIG_MXC_OCOTP -#define CONFIG_CMD_FUSE - -/* I2C Configs */ -#define CONFIG_SYS_I2C_SPEED 100000 - -#define CONFIG_OF_SYSTEM_SETUP - -/* Framebuffer */ -#ifdef CONFIG_VIDEO -#define CONFIG_VIDEO_IMXDCSS -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_IMX_VIDEO_SKIP -#endif - -#if defined(CONFIG_ANDROID_SUPPORT) -#include "cl-imx8_android.h" -#endif - -#endif diff --git a/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8_android.h b/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8_android.h deleted file mode 100644 index aa8e010..0000000 --- a/recipes-bsp/u-boot/rvphone/cl-imx8/include/configs/cl-imx8_android.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright 2017 NXP - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CL_IMX8_ANDROID_H -#define __CL_IMX8_ANDROID_H - -#define CONFIG_CMD_READ - -#define CONFIG_ANDROID_AB_SUPPORT -#define CONFIG_AVB_SUPPORT -#define CONFIG_SUPPORT_EMMC_RPMB -#define CONFIG_SYSTEM_RAMDISK_SUPPORT -#define CONFIG_AVB_FUSE_BANK_SIZEW 0 -#define CONFIG_AVB_FUSE_BANK_START 0 -#define CONFIG_AVB_FUSE_BANK_END 0 -#define CONFIG_FASTBOOT_LOCK -#define FSL_FASTBOOT_FB_DEV "mmc" - -#ifdef CONFIG_SYS_MALLOC_LEN -#undef CONFIG_SYS_MALLOC_LEN -#define CONFIG_SYS_MALLOC_LEN (96 * SZ_1M) -#endif - -#define CONFIG_ANDROID_RECOVERY - -#define CONFIG_CMD_BOOTA -#define CONFIG_SUPPORT_RAW_INITRD - -#undef CONFIG_EXTRA_ENV_SETTINGS -#undef CONFIG_BOOTCOMMAND - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "splashpos=m,m\0" \ - "fdt_high=0xffffffffffffffff\0" \ - "initrd_high=0xffffffffffffffff\0" \ - -/* Enable mcu firmware flash */ -#ifdef CONFIG_FLASH_MCUFIRMWARE_SUPPORT -#define ANDROID_MCU_FRIMWARE_DEV_TYPE DEV_MMC -#define ANDROID_MCU_FIRMWARE_START 0x500000 -#define ANDROID_MCU_FIRMWARE_SIZE 0x40000 -#define ANDROID_MCU_FIRMWARE_HEADER_STACK 0x20020000 -#endif - -#ifdef CONFIG_FSL_CAAM_KB -#undef CONFIG_FSL_CAAM_KB -#endif -#define AVB_AB_I_UNDERSTAND_LIBAVB_AB_IS_DEPRECATED - -#endif /* __CL_IMX8_ANDROID_H */ -- cgit v1.2.3