diff options
Diffstat (limited to 'recipes-kernel/linux/rvphone/cl-imx8/dts/cl-imx8-base.dtsi')
| -rw-r--r-- | recipes-kernel/linux/rvphone/cl-imx8/dts/cl-imx8-base.dtsi | 131 |
1 files changed, 64 insertions, 67 deletions
diff --git a/recipes-kernel/linux/rvphone/cl-imx8/dts/cl-imx8-base.dtsi b/recipes-kernel/linux/rvphone/cl-imx8/dts/cl-imx8-base.dtsi index 96e9a3e..6b413cc 100644 --- a/recipes-kernel/linux/rvphone/cl-imx8/dts/cl-imx8-base.dtsi +++ b/recipes-kernel/linux/rvphone/cl-imx8/dts/cl-imx8-base.dtsi @@ -1,3 +1,5 @@ +#include "../freescale/fsl-imx8mq.dtsi" + / { chosen { bootargs = "console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200"; @@ -41,18 +43,6 @@ off-on-delay = <20000>; enable-active-high; }; - - reg_usb_mux: regulator-usb-mux { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbimux1>; - regulator-name = "usb_mux"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; - regulator-always-on; - enable-active-low; - }; }; pwmleds { @@ -77,12 +67,6 @@ >; }; - pinctrl_usbimux1: usbmux1grp { - fsl,pins = < - MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x16 - >; - }; - pinctrl_usdhc1_reg: usdhc1reggrp { fsl,pins = < MX8MQ_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x1c @@ -95,36 +79,6 @@ >; }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f - MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f - MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f - >; - }; - - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX8MQ_IOMUXC_I2C4_SCL_PWM2_OUT 0x16 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x79 - MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x79 - MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x79 - MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x79 - MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 - >; - }; - pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 @@ -213,6 +167,45 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x79 + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x79 + MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x79 + MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x79 + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 /* P1.13 */ + MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 /* P1.11 */ + MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 /* P1.15 */ + MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x82 /* P1.17 */ + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C4_SCL_PWM2_OUT 0x16 + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 @@ -322,12 +315,6 @@ status = "disabled"; }; -&pwm2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm2>; - status = "okay"; -}; - &uart3 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; @@ -336,6 +323,23 @@ status = "okay"; }; +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + spidev: spidev@0 { + compatible = "spidev"; + spi-max-frequency = <10000000>; + reg = <0>; + status = "okay"; + }; +}; + &usdhc1 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -360,6 +364,12 @@ status = "okay"; }; +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + &usb3_phy0 { status = "okay"; }; @@ -373,19 +383,6 @@ dr_mode = "otg"; }; -&usb3_phy1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&usb_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - &gpu_pd { power-supply = <&sw1a_reg>; }; |