From 0894a1e7664504312a9cdfc826eef89030aaaa1b Mon Sep 17 00:00:00 2001 From: Uros Majstorovic Date: Wed, 5 Aug 2020 02:52:42 +0200 Subject: new directory sructure for fe310 fw --- code/fe310/drivers/prci_driver.c | 265 --------------------------------------- 1 file changed, 265 deletions(-) delete mode 100644 code/fe310/drivers/prci_driver.c (limited to 'code/fe310/drivers/prci_driver.c') diff --git a/code/fe310/drivers/prci_driver.c b/code/fe310/drivers/prci_driver.c deleted file mode 100644 index c2df2c9..0000000 --- a/code/fe310/drivers/prci_driver.c +++ /dev/null @@ -1,265 +0,0 @@ -// See LICENSE file for license details - -#include "platform.h" - -#ifdef PRCI_CTRL_ADDR -#include "prci_driver.h" -#include - -#define rdmcycle(x) { \ - uint32_t lo, hi, hi2; \ - __asm__ __volatile__ ("1:\n\t" \ - "csrr %0, mcycleh\n\t" \ - "csrr %1, mcycle\n\t" \ - "csrr %2, mcycleh\n\t" \ - "bne %0, %2, 1b\n\t" \ - : "=r" (hi), "=r" (lo), "=r" (hi2)) ; \ - *(x) = lo | ((uint64_t) hi << 32); \ - } - -uint32_t PRCI_measure_mcycle_freq(uint32_t mtime_ticks, uint32_t mtime_freq) -{ - - uint32_t start_mtime = CLINT_REG(CLINT_MTIME); - uint32_t end_mtime = start_mtime + mtime_ticks + 1; - - // Make sure we won't get rollover. - while (end_mtime < start_mtime) { - start_mtime = CLINT_REG(CLINT_MTIME); - end_mtime = start_mtime + mtime_ticks + 1; - } - - // Don't start measuring until mtime edge. - uint32_t tmp = start_mtime; - do { - start_mtime = CLINT_REG(CLINT_MTIME); - } while (start_mtime == tmp); - - uint64_t start_mcycle; - rdmcycle(&start_mcycle); - - while (CLINT_REG(CLINT_MTIME) < end_mtime) ; - - uint64_t end_mcycle; - rdmcycle(&end_mcycle); - uint32_t difference = (uint32_t) (end_mcycle - start_mcycle); - - uint64_t freq = ((uint64_t) difference * mtime_freq) / mtime_ticks; - return (uint32_t) freq & 0xFFFFFFFF; - -} - -unsigned long PRCI_get_cpu_freq() -{ - static uint32_t cpu_freq; - - if (!cpu_freq) { - // warm up I$ - PRCI_measure_mcycle_freq(3000, RTC_FREQ); - // measure for real - cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ); - } - - return cpu_freq; -} - -void PRCI_use_hfrosc(int div, int trim) -{ - // Make sure the HFROSC is running at its default setting - // It is OK to change this even if we are running off of it. - - PRCI_REG(PRCI_HFROSCCFG) = (ROSC_DIV(div) | ROSC_TRIM(trim) | ROSC_EN(1)); - - while ((PRCI_REG(PRCI_HFROSCCFG) & ROSC_RDY(1)) == 0); - - PRCI_REG(PRCI_PLLCFG) &= ~PLL_SEL(1); -} - -void PRCI_use_pll(int refsel, int bypass, - int r, int f, int q, int finaldiv, - int hfroscdiv, int hfrosctrim) -{ - // Ensure that we aren't running off the PLL before we mess with it. - if (PRCI_REG(PRCI_PLLCFG) & PLL_SEL(1)) { - // Make sure the HFROSC is running at its default setting - PRCI_use_hfrosc(4, 16); - } - - // Set PLL Source to be HFXOSC if desired. - uint32_t config_value = 0; - - config_value |= PLL_REFSEL(refsel); - - if (bypass) { - // Bypass - config_value |= PLL_BYPASS(1); - - PRCI_REG(PRCI_PLLCFG) = config_value; - - // If we don't have an HFXTAL, this doesn't really matter. - // Set our Final output divide to divide-by-1: - PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0)); - } else { - - // To overclock, use the hfrosc - if (hfrosctrim >= 0 && hfroscdiv >= 0) { - PRCI_use_hfrosc(hfroscdiv, hfrosctrim); - } - - // Set DIV Settings for PLL - - // (Legal values of f_REF are 6-48MHz) - - // Set DIVR to divide-by-2 to get 8MHz frequency - // (legal values of f_R are 6-12 MHz) - - config_value |= PLL_BYPASS(1); - config_value |= PLL_R(r); - - // Set DIVF to get 512Mhz frequncy - // There is an implied multiply-by-2, 16Mhz. - // So need to write 32-1 - // (legal values of f_F are 384-768 MHz) - config_value |= PLL_F(f); - - // Set DIVQ to divide-by-2 to get 256 MHz frequency - // (legal values of f_Q are 50-400Mhz) - config_value |= PLL_Q(q); - - // Set our Final output divide: - if (finaldiv < 0) { - PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0)); - } else { - PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV(finaldiv)); - } - - PRCI_REG(PRCI_PLLCFG) = config_value; - - // Un-Bypass the PLL. - PRCI_REG(PRCI_PLLCFG) &= ~PLL_BYPASS(1); - - // Wait for PLL Lock - // Note that the Lock signal can be glitchy. - // Need to wait 100 us - // RTC is running at 32kHz. - // So wait 4 ticks of RTC. - uint32_t now = CLINT_REG(CLINT_MTIME); - while (CLINT_REG(CLINT_MTIME) - now < 4) ; - - // Now it is safe to check for PLL Lock - while ((PRCI_REG(PRCI_PLLCFG) & PLL_LOCK(1)) == 0); - - } - - // Switch over to PLL Clock source - PRCI_REG(PRCI_PLLCFG) |= PLL_SEL(1); - - // If we're running off HFXOSC, turn off the HFROSC to - // save power. - if (refsel) { - PRCI_REG(PRCI_HFROSCCFG) &= ~ROSC_EN(1); - } - -} - -void PRCI_use_default_clocks() -{ - // Turn off the LFROSC - AON_REG(AON_LFROSC) &= ~ROSC_EN(1); - - // Use HFROSC - PRCI_use_hfrosc(4, 16); -} - -void PRCI_use_hfxosc(uint32_t finaldiv) -{ - - PRCI_use_pll(1, // Use HFXTAL - 1, // Bypass = 1 - 0, // PLL settings don't matter - 0, // PLL settings don't matter - 0, // PLL settings don't matter - finaldiv, - -1, - -1); -} - -// This is a generic function, which -// doesn't span the entire range of HFROSC settings. -// It only adjusts the trim, which can span a hundred MHz or so. -// This function does not check the legality of the PLL settings -// at all, and it is quite possible to configure invalid PLL settings -// this way. -// It returns the actual measured CPU frequency. - -uint32_t PRCI_set_hfrosctrim_for_f_cpu(uint32_t f_cpu, PRCI_freq_target target ) -{ - - uint32_t hfrosctrim = 0; - uint32_t hfroscdiv = 4; - uint32_t prev_trim = 0; - - // In this function we use PLL settings which - // will give us a 32x multiplier from the output - // of the HFROSC source to the output of the - // PLL. We first measure our HFROSC to get the - // right trim, then finally use it as the PLL source. - // We should really check here that the f_cpu - // requested is something in the limit of the PLL. For - // now that is up to the user. - - // This will undershoot for frequencies not divisible by 16. - uint32_t desired_hfrosc_freq = (f_cpu / 16); - - PRCI_use_hfrosc(hfroscdiv, hfrosctrim); - - // Ignore the first run (for icache reasons) - uint32_t cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ); - - cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ); - uint32_t prev_freq = cpu_freq; - - while ((cpu_freq < desired_hfrosc_freq) && (hfrosctrim < 0x1F)){ - prev_trim = hfrosctrim; - prev_freq = cpu_freq; - hfrosctrim ++; - PRCI_use_hfrosc(hfroscdiv, hfrosctrim); - cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ); - } - - // We couldn't go low enough - if (prev_freq > desired_hfrosc_freq) { - PRCI_use_pll(0, 0, 1, 31, 1, -1, hfroscdiv, prev_trim); - cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ); - return cpu_freq; - } - - // We couldn't go high enough - if (cpu_freq < desired_hfrosc_freq) { - PRCI_use_pll(0, 0, 1, 31, 1, -1, hfroscdiv, prev_trim); - cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ); - return cpu_freq; - } - - // Check for over/undershoot - switch(target) { - case(PRCI_FREQ_CLOSEST): - if ((desired_hfrosc_freq - prev_freq) < (cpu_freq - desired_hfrosc_freq)) { - PRCI_use_pll(0, 0, 1, 31, 1, -1, hfroscdiv, prev_trim); - } else { - PRCI_use_pll(0, 0, 1, 31, 1, -1, hfroscdiv, hfrosctrim); - } - break; - case(PRCI_FREQ_UNDERSHOOT): - PRCI_use_pll(0, 0, 1, 31, 1, -1, hfroscdiv, prev_trim); - break; - default: - PRCI_use_pll(0, 0, 1, 31, 1, -1, hfroscdiv, hfrosctrim); - } - - cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ); - return cpu_freq; - -} - -#endif -- cgit v1.2.3