diff options
Diffstat (limited to 'recipes-bsp/u-boot/rvphone/cl-imx8/dts')
| -rw-r--r-- | recipes-bsp/u-boot/rvphone/cl-imx8/dts/cl-imx8.dts | 403 |
1 files changed, 0 insertions, 403 deletions
diff --git a/recipes-bsp/u-boot/rvphone/cl-imx8/dts/cl-imx8.dts b/recipes-bsp/u-boot/rvphone/cl-imx8/dts/cl-imx8.dts deleted file mode 100644 index a057719..0000000 --- a/recipes-bsp/u-boot/rvphone/cl-imx8/dts/cl-imx8.dts +++ /dev/null @@ -1,403 +0,0 @@ -/* - * Copyright (C) 2017 CopuLab Ltd. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/dts-v1/; - -/* First 128KB is for PSCI ATF. */ -/memreserve/ 0x40000000 0x00020000; - -#include "fsl-imx8mq.dtsi" - -/ { - model = "rvPhone cl-imx8"; - compatible = "rvphone,cl-imx8", "fsl,imx8mq"; - - chosen { - bootargs = "console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200"; - stdout-path = &uart3; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usdhc2_vmmc: regulator-vsd-3v3 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2_reg>; - regulator-name = "VSD_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; - off-on-delay-us = <20000>; - enable-active-high; - }; - - reg_usb_mux: regulator-usb-mux { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbimux1>; - regulator-name = "usb_mux"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; - regulator-always-on; - enable-active-low; - }; - }; - - leds { - compatible = "gpio-leds"; - heartbeat-led { - label = "Heartbeat"; - gpios = <&gpio1 12 0>; - linux,default-trigger = "heartbeat"; - }; - }; - - pwmleds { - compatible = "pwm-leds"; - - ledpwm2 { - label = "PWM2"; - pwms = <&pwm2 0 50000>; - max-brightness = <255>; - }; - }; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - cl-som-imx8 { - pinctrl_hog: hoggrp { - fsl,pins = < - MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x16 - >; - }; - - pinctrl_usdhc2_reg: usdhc2reggrp { - fsl,pins = < - MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 - >; - }; - - pinctrl_usbimux1: usbmux1grp { - fsl,pins = < - MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x16 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f - MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f - >; - }; - - - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT 0x16 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x79 - MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x79 - MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x79 - MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x79 - MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x79 - MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x79 - MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x79 - MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x79 - MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x19 - MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 - MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 - MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 - MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 - MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 - MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 - MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 - MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 - MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 - MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 - MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 - MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 - >; - }; - - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { - fsl,pins = < - MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85 - MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5 - MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5 - MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5 - MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5 - MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5 - MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5 - MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5 - MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5 - MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5 - MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85 - MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 - >; - }; - - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { - fsl,pins = < - MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87 - MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7 - MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7 - MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7 - MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7 - MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7 - MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7 - MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7 - MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7 - MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7 - MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87 - MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 - >; - }; - - pinctrl_usdhc2_gpio: usdhc2grpgpio { - fsl,pins = < - MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 - MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x41 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 - MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 - MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 - MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 - MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 - MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { - fsl,pins = < - MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85 - MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5 - MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5 - MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5 - MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5 - MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { - fsl,pins = < - MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87 - MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7 - MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7 - MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7 - MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7 - MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 - >; - }; - }; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; - - pmic@8 { - compatible = "fsl,pfuze100"; - fsl,pfuze-support-disable-sw; - reg = <0x8>; - - regulators { - sw1a_reg: sw1ab { - regulator-min-microvolt = <825000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - sw1c_reg: sw1c { - regulator-min-microvolt = <825000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <1060000>; - regulator-max-microvolt = <1170000>; - regulator-always-on; - }; - - sw3a_reg: sw3ab { - regulator-min-microvolt = <825000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - sw4_reg: sw4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - }; - - snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - vref_reg: vrefddr { - regulator-always-on; - }; - - vgen1_reg: vgen1 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen2_reg: vgen2 { - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <975000>; - regulator-always-on; - }; - - vgen3_reg: vgen3 { - regulator-min-microvolt = <1675000>; - regulator-max-microvolt = <1975000>; - regulator-always-on; - }; - - vgen4_reg: vgen4 { - regulator-min-microvolt = <1625000>; - regulator-max-microvolt = <1875000>; - regulator-always-on; - }; - - vgen5_reg: vgen5 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3625000>; - regulator-always-on; - }; - - vgen6_reg: vgen6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - }; - }; -}; - -&pwm2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm2>; - status = "okay"; -}; - -&uart3 { /* console */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - assigned-clocks = <&clk IMX8MQ_CLK_UART3_SRC>; - assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; - status = "okay"; -}; - -&uart4 { /* BT */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - assigned-clocks = <&clk IMX8MQ_CLK_UART4_SRC>; - assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; - fsl,uart-has-rtscts; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; - bus-width = <4>; - cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; - vmmc-supply = <®_usdhc2_vmmc>; - no-1-8-v; - status = "okay"; -}; - -&gpu { - status = "okay"; -}; - -&vpu { - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; -}; - -&mu { - status = "okay"; -}; - -&cpu_alert0 { - temperature = <125000>; -}; - -&cpu_crit0 { - temperature = <165000>; -}; |