1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
|
#include <stdio.h>
#include <stdint.h>
#include <stddef.h>
#include <string.h>
#include <freertos/FreeRTOS.h>
#include <freertos/task.h>
#include <freertos/semphr.h>
// #include <freertos/heap_regions.h>
#include <esp_system.h>
#include <esp_event.h>
#include <esp_event_loop.h>
#include <esp_log.h>
#include <esp_err.h>
#include <esp_heap_caps.h>
#include <driver/spi_slave.h>
#include "msgq.h"
#include "transport.h"
#include "fe310.h"
static EOSMsgQ send_q;
static EOSMsgItem send_q_array[EOS_FE310_SIZE_Q];
#define SPI_GPIO_RTS 16
#define SPI_GPIO_CTS 17
#define SPI_GPIO_MOSI 23
#define SPI_GPIO_MISO 19
#define SPI_GPIO_SCLK 18
#define SPI_GPIO_CS 5
static SemaphoreHandle_t mutex;
static const char *TAG = "EOS";
static eos_fe310_fptr_t cmd_handler[EOS_FE310_MAX_CMD];
static void bad_handler(unsigned char cmd, unsigned char *buffer, uint16_t len) {
ESP_LOGI(TAG, "FE310 RECV: bad handler: %d", cmd);
}
static void worker(void *pvParameters) {
int repeat = 0;
esp_err_t ret;
unsigned char cmd = 0;
unsigned char *buffer;
uint16_t len;
unsigned char *buf_send = heap_caps_malloc(EOS_FE310_SIZE_BUF, MALLOC_CAP_DMA);
unsigned char *buf_recv = heap_caps_malloc(EOS_FE310_SIZE_BUF, MALLOC_CAP_DMA);
spi_slave_transaction_t t;
memset(&t, 0, sizeof(t));
t.length = EOS_FE310_SIZE_BUF*8;
t.tx_buffer = buf_send;
t.rx_buffer = buf_recv;
xSemaphoreTake(mutex, portMAX_DELAY);
for (;;) {
if (!repeat) {
eos_msgq_pop(&send_q, &cmd, &buffer, &len);
if (cmd) {
buf_send[0] = ((cmd << 3) | (len >> 8)) & 0xFF;
buf_send[1] = len & 0xFF;
if (buffer) memcpy(buf_send + 2, buffer, len);
} else {
WRITE_PERI_REG(GPIO_OUT_W1TC_REG, (1 << SPI_GPIO_RTS));
buf_send[0] = 0;
buf_send[1] = 0;
}
}
memset(buf_recv, 0, EOS_FE310_SIZE_BUF);
ret = spi_slave_transmit(HSPI_HOST, &t, portMAX_DELAY);
repeat = 0;
if (buf_recv[0] != 0) {
xSemaphoreGive(mutex);
cmd = (buf_recv[0] >> 3);
len = ((buf_recv[0] & 0x07) << 8);
len |= buf_recv[1];
buffer = buf_recv + 2;
if (cmd & EOS_FE310_CMD_FLAG_ONEW) {
cmd &= ~EOS_FE310_CMD_FLAG_ONEW;
if (buf_send[0]) repeat = 1;
}
if (cmd < EOS_FE310_MAX_CMD) {
cmd_handler[cmd](cmd, buffer, len);
} else {
bad_handler(cmd, buffer, len);
}
xSemaphoreTake(mutex, portMAX_DELAY);
} else {
// ESP_LOGI(TAG, "FE310 RECV NULL");
}
// vTaskDelay(5000 / portTICK_PERIOD_MS);
}
xSemaphoreGive(mutex);
}
// Called after a transaction is queued and ready for pickup by master. We use this to set the handshake line high.
static void _post_setup_cb(spi_slave_transaction_t *trans) {
xSemaphoreGive(mutex);
WRITE_PERI_REG(GPIO_OUT_W1TS_REG, (1 << SPI_GPIO_CTS));
}
// Called after transaction is sent/received. We use this to set the handshake line low.
static void _post_trans_cb(spi_slave_transaction_t *trans) {
xSemaphoreTake(mutex, portMAX_DELAY);
WRITE_PERI_REG(GPIO_OUT_W1TC_REG, (1 << SPI_GPIO_CTS));
}
void eos_fe310_init(void) {
esp_err_t ret;
// Configuration for the handshake lines
gpio_config_t io_conf;
io_conf.intr_type = GPIO_INTR_DISABLE;
io_conf.mode = GPIO_MODE_OUTPUT;
io_conf.pin_bit_mask = (1 << SPI_GPIO_CTS);
gpio_config(&io_conf);
WRITE_PERI_REG(GPIO_OUT_W1TC_REG, (1 << SPI_GPIO_CTS));
io_conf.intr_type = GPIO_INTR_DISABLE;
io_conf.mode = GPIO_MODE_OUTPUT;
io_conf.pin_bit_mask = (1 << SPI_GPIO_RTS);
gpio_config(&io_conf);
WRITE_PERI_REG(GPIO_OUT_W1TC_REG, (1 << SPI_GPIO_RTS));
//Configuration for the SPI bus
spi_bus_config_t buscfg = {
.mosi_io_num = SPI_GPIO_MOSI,
.miso_io_num = SPI_GPIO_MISO,
.sclk_io_num = SPI_GPIO_SCLK
};
//Configuration for the SPI slave interface
spi_slave_interface_config_t slvcfg = {
.mode = 0,
.spics_io_num = SPI_GPIO_CS,
.queue_size = 2,
.flags = 0,
.post_setup_cb = _post_setup_cb,
.post_trans_cb = _post_trans_cb
};
//Enable pull-ups on SPI lines so we don't detect rogue pulses when no master is connected.
gpio_set_pull_mode(SPI_GPIO_MOSI, GPIO_PULLUP_ONLY);
gpio_set_pull_mode(SPI_GPIO_SCLK, GPIO_PULLUP_ONLY);
gpio_set_pull_mode(SPI_GPIO_CS, GPIO_PULLUP_ONLY);
int i;
for (i=0; i<EOS_FE310_MAX_CMD; i++) {
cmd_handler[i] = bad_handler;
}
//Initialize SPI slave interface
ret=spi_slave_initialize(HSPI_HOST, &buscfg, &slvcfg, 1);
assert(ret==ESP_OK);
eos_msgq_init(&send_q, send_q_array, EOS_FE310_SIZE_Q);
mutex = xSemaphoreCreateMutex();
xTaskCreate(&worker, "fe310_receiver", 4096, NULL, 5, NULL);
}
int eos_fe310_send(unsigned char cmd, unsigned char *buffer, uint16_t len) {
xSemaphoreTake(mutex, portMAX_DELAY);
WRITE_PERI_REG(GPIO_OUT_W1TS_REG, (1 << SPI_GPIO_RTS));
int rv = eos_msgq_push(&send_q, cmd, buffer, len);
xSemaphoreGive(mutex);
return rv;
}
void eos_fe310_set_handler(unsigned char cmd, eos_fe310_fptr_t handler) {
cmd_handler[cmd] = handler;
}
|
