1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
|
#include <stdio.h>
#include <esp_log.h>
#include "eos.h"
#include "i2c.h"
static const char *TAG = "EOS DRV2605L";
#define DRV2605L_ADDR 0x5A
#define DRV2605_REG_STATUS 0x00 ///< Status register
#define DRV2605_REG_MODE 0x01 ///< Mode register
#define DRV2605_MODE_INTTRIG 0x00 ///< Internal trigger mode
#define DRV2605_MODE_EXTTRIGEDGE 0x01 ///< External edge trigger mode
#define DRV2605_MODE_EXTTRIGLVL 0x02 ///< External level trigger mode
#define DRV2605_MODE_PWMANALOG 0x03 ///< PWM/Analog input mode
#define DRV2605_MODE_AUDIOVIBE 0x04 ///< Audio-to-vibe mode
#define DRV2605_MODE_REALTIME 0x05 ///< Real-time playback (RTP) mode
#define DRV2605_MODE_DIAGNOS 0x06 ///< Diagnostics mode
#define DRV2605_MODE_AUTOCAL 0x07 ///< Auto calibration mode
#define DRV2605_REG_RTPIN 0x02 ///< Real-time playback input register
#define DRV2605_REG_LIBRARY 0x03 ///< Waveform library selection register
#define DRV2605_REG_WAVESEQ1 0x04 ///< Waveform sequence register 1
#define DRV2605_REG_WAVESEQ2 0x05 ///< Waveform sequence register 2
#define DRV2605_REG_WAVESEQ3 0x06 ///< Waveform sequence register 3
#define DRV2605_REG_WAVESEQ4 0x07 ///< Waveform sequence register 4
#define DRV2605_REG_WAVESEQ5 0x08 ///< Waveform sequence register 5
#define DRV2605_REG_WAVESEQ6 0x09 ///< Waveform sequence register 6
#define DRV2605_REG_WAVESEQ7 0x0A ///< Waveform sequence register 7
#define DRV2605_REG_WAVESEQ8 0x0B ///< Waveform sequence register 8
#define DRV2605_REG_GO 0x0C ///< Go register
#define DRV2605_REG_OVERDRIVE 0x0D ///< Overdrive time offset register
#define DRV2605_REG_SUSTAINPOS 0x0E ///< Sustain time offset, positive register
#define DRV2605_REG_SUSTAINNEG 0x0F ///< Sustain time offset, negative register
#define DRV2605_REG_BREAK 0x10 ///< Brake time offset register
#define DRV2605_REG_AUDIOCTRL 0x11 ///< Audio-to-vibe control register
#define DRV2605_REG_AUDIOLVL 0x12 ///< Audio-to-vibe minimum input level register
#define DRV2605_REG_AUDIOMAX 0x13 ///< Audio-to-vibe maximum input level register
#define DRV2605_REG_AUDIOOUTMIN 0x14 ///< Audio-to-vibe minimum output drive register
#define DRV2605_REG_AUDIOOUTMAX 0x15 ///< Audio-to-vibe maximum output drive register
#define DRV2605_REG_RATEDV 0x16 ///< Rated voltage register
#define DRV2605_REG_CLAMPV 0x17 ///< Overdrive clamp voltage register
#define DRV2605_REG_AUTOCALCOMP 0x18 ///< Auto-calibration compensation result register
#define DRV2605_REG_AUTOCALEMP 0x19 ///< Auto-calibration back-EMF result register
#define DRV2605_REG_FEEDBACK 0x1A ///< Feedback control register
#define DRV2605_REG_CONTROL1 0x1B ///< Control1 Register
#define DRV2605_REG_CONTROL2 0x1C ///< Control2 Register
#define DRV2605_REG_CONTROL3 0x1D ///< Control3 Register
#define DRV2605_REG_CONTROL4 0x1E ///< Control4 Register
#define DRV2605_REG_VBAT 0x21 ///< Vbat voltage-monitor register
#define DRV2605_REG_LRARESON 0x22 ///< LRA resonance-period register
void eos_drv2605l_test(void) {
uint8_t data = 0;
int ret = eos_i2c_read(DRV2605L_ADDR, DRV2605_REG_STATUS, &data, 1);
if (ret) ESP_LOGE(TAG, "I2C ERROR!");
eos_i2c_write8(DRV2605L_ADDR, DRV2605_REG_MODE, 0x00); // out of standby
eos_i2c_write8(DRV2605L_ADDR, DRV2605_REG_RTPIN, 0x00); // no real-time-playback
eos_i2c_write8(DRV2605L_ADDR, DRV2605_REG_WAVESEQ1, 1); // strong click
eos_i2c_write8(DRV2605L_ADDR, DRV2605_REG_WAVESEQ2, 0); // end sequence
eos_i2c_write8(DRV2605L_ADDR, DRV2605_REG_OVERDRIVE, 0); // no overdrive
eos_i2c_write8(DRV2605L_ADDR, DRV2605_REG_SUSTAINPOS, 0);
eos_i2c_write8(DRV2605L_ADDR, DRV2605_REG_SUSTAINNEG, 0);
eos_i2c_write8(DRV2605L_ADDR, DRV2605_REG_BREAK, 0);
eos_i2c_write8(DRV2605L_ADDR, DRV2605_REG_AUDIOMAX, 0x64);
// LRA open loop
eos_i2c_write8(DRV2605L_ADDR, DRV2605_REG_FEEDBACK, eos_i2c_read8(DRV2605L_ADDR, DRV2605_REG_FEEDBACK) | 0x80); // turn on N_ERM_LRA
eos_i2c_write8(DRV2605L_ADDR, DRV2605_REG_CONTROL3, eos_i2c_read8(DRV2605L_ADDR, DRV2605_REG_CONTROL3) | 0x01); // turn on LRA_OPEN_LOOP
eos_i2c_write8(DRV2605L_ADDR, DRV2605_REG_LIBRARY, 6); // set LRA library
eos_i2c_write8(DRV2605L_ADDR, DRV2605_REG_GO, 1); // go
}
|
